More Problems

Saturday, January 10, 2009

Divide error

Note: This document also applies to the error messages "Divide by Zero", "Divide by 0" or "Divide Overflow" error messages.
Additional information:
The divide error messages are caused when the computer or software attempts run a process that attempts to perform a mathematical division by zero, which is an illegal operation. This error message could also be caused by a computer or software limitation or conflict with computer memory.
Cause:
This issue can be caused by any of the below possibilities.
1. Hardware / software incompatibility
2. Error with autoexec.bat / config.sys
3. Driver issue
4. Software issue
5. External Cache / 2nd level Cache
6. Improper calculation
7. Operating System issue
8. Hardware issue
Solution:
Hardware / software incompatibility

This issue can occur if software is being run on a computer that has hardware that is incompatible with the software. For example, this issue may occur with restore software designed for a specific computer and is being run on another computer or on the correct computer that has added hardware within it.
Ensure that the software that is being run on the computer is compatible with the computer and that the computer meets the system requirements and/or determine if there are updates or replacements to the software being used.
Error with autoexec.bat / config.sys
Users who are running Microsoft Windows 3.x can temporarily remark or remove any additional lines that may not be required in the autoexec.bat / config.sys
Users who are running Microsoft Windows 95 or Windows 98, it is recommended that they temporarily rename the autoexec.bat and config.sys to ensure that these files are not causing the issue. To do this, follow the below instructions:
1. Click Start / Shutdown and restart the computer in a MS-DOS mode.
2. Once at the MS-DOS mode, type:cd\ ren autoexec.bat autoexec.ch ren config.sys config.ch
3. Once the files have been renamed, reboot the computer.
Note: if you are unable to get to a MS-DOS prompt or to Windows to rename or edit the files, boot the computer to a MS-DOS mode only.
Driver issue
If you are encountering a divide error within Windows, ensure that all computer hardware devices, such as the computer video card, sound card, network card or modem have the latest drivers and/or patches.
Software issue
If the divide error is occurring while in a computer game or software program and the above recommendations does not resolve your issue, ensure that all software patches and/or upgrades have been obtained and applied.
In addition, ensure that another program that may be running in the background, such as a Virus protection program, is not causing your issue by end tasking all third-party programs / TSRs.
External cache / 2nd level cache

If you are encountering the divide error in an older software program or game it can be caused by compatibility issues with External / 2nd level cache. Temporarily disabling this feature in CMOS may resolve your issue.
Improper calculation
If you are performing a calculation in any type of program and experience a divide error, ensure that the calculation being performed is possible. Some programs are not capable of verifying the accuracy of a calculation and may perform an illegal instruction.
However, many programs, such as Microsoft Excel, will generate an error such as #DIV!0 error indicating the formula or calculation is invalid or you are attempting to divide by zero.
Operating system issue
If you continue to experience a divide error while in Windows or in a particular software program and have followed each of the above recommendations, ensure that the issue is not being caused by the operating system by attempting to reinstall the operating system.
Hardware issue
Finally, if none of the above recommendations resolve or help to determine the cause of your issue it is possible that your computer may have a hardware issue. Generally, when a Divide Error is encountered because of hardware it is caused by an issue with the computer Processor (CPU).

Computer turns off without warning

Cause:
This issue could be caused by any of the below possibilities.
Heat related issue.
Hardware issue or error.
Computer virus.
Issue with operating system.
Other failing hardware
Answer:
Heat related issue
A computer that turns off without warning is often a heat related issue. Many computers today are designed to turn off or automatically reboot if the computer, processor, or other device in your computer gets too hot. If you have heard any abnormal noises coming from your computer recently such as a high squealing, this could indicate a fan may be failing in your computer.
You can first start by verifying the fan on the power supply is working by examining the back of the computer and seeing if the fan is moving and moving smoothly. For all other fans in the computer, you will need to either open the computer and make sure the fan are working (processor fan and case fans) and/or if your BIOS monitors the RPM of the fans, enter BIOS and make sure the BIOS does not report any errors.
While inside the computer it's also a good idea to verify the processor heatsink is properly connected by disconnecting and reconnecting the heatsink. If the processor heatsink is not properly it will not keep the processor cool causing the computer to overheat.
Users may also be able to determine how hot their computer is by onboard thermal sensors. If your computer comes equipped with these sensors, make sure your CPU is not running to hot.
Hardware issue or error
Any failing hardware component in your computer could cause your computer to unexpectedly turn off without warning. If you have recently attempted to add a new hardware device, remove that device to make sure it is not causing your issues.
Before attempting to remove any hardware, make sure you are not encountering this issue because of hardware conflicts by viewing Device Manager for errors.
If you have not recently installed any new hardware into the computer, the next best solution to determining if this is a hardware issue would be remove any hardware on the computer that is not needed. For example, remove your modem, network card, sound card, and any other expansion cards that are not needed for the computer to operate. Run the computer without these cards to see if they are the cause of your issue.
Computer virus
It's possible for your computer to be infected with a virus that is designed to shut down your computer or turn it off. If your computer seems to be turning off when executing a certain program at specific times in the day, it could be infected.
If you believe your computer may be infected with a virus or are uncertain if your computer is infected with a virus, make sure your virus scanner definitions are up to date.
Issue with operating system
If after following each of the above recommendations your computer still continues to reboot, it is likely that you are experiencing a Microsoft Windows operating system related issue that cannot be explained. To help make sure this is the case, please try the below steps.
1. Reboot the computer and enter CMOS setup as the computer is booting.
2. After you have loaded the computer in CMOS setup, let the computer sit.
If the computer does not turn off while letting the computer sit in CMOS, it is likely that you are in fact experiencing an issue with Microsoft Windows or your operating system and it is recommend that if you have followed all of the above recommendations that you reinstall your version of Microsoft Windows.
Other failing hardware
If after reinstalling your operating system, or during the installation of your operating system, your computer turns off abnormally, it is very likely that other hardware is failing in the computer. Often this is RAM, CPU, Motherboard, and/or Power Supply (in that order).
If you have extra available parts or have a friend or co-worker with a similar configuration that is willing to allow you to test their hardware in your computer, try swapping these parts to determine if they are at fault. Otherwise, you will need to have the computer serviced.